Universal Zip
Windows 10 & 11 Buy license · $24.95
Compress and share

How to Split a Large File Into Smaller Parts on Windows

How to split a large file into smaller parts on Windows for email, USB drives or uploads, and how the person receiving the parts joins them back together.

Updated 5 minute read The Universal Zip team

The easiest way to split a large file into smaller parts on Windows is to put it in an archive and choose a volume size. An archive program compresses the file, then cuts the result into numbered parts such as project.7z.001, project.7z.002 and so on. Each part fits your limit, and the person receiving them extracts the first part to rebuild the original. File Explorer cannot split files, so you need an archive program for this.

Below is how to pick a part size, how to do the split, and how the receiver joins the parts back together without any fuss.

When splitting a file makes sense

  • Email. Most providers cap attachments at 20 to 25 MB, and many business mail servers set lower limits.
  • FAT32 USB drives and SD cards. FAT32 cannot hold any single file of 4 GB or more, however much space is left on the drive.
  • Discs. A CD holds about 700 MB and a single-layer DVD about 4.7 GB.
  • Upload limits. Forms, support portals and file hosts often cap single uploads.
  • Unreliable connections. If an upload fails, you only resend one part instead of the whole file.

If you only need to share a big file with one person and both of you use cloud storage, a share link is often simpler. Splitting shines when the destination has a hard limit you cannot change.

Choosing a part size

DestinationLimitSuggested part size
Gmail or Yahoo Mail25 MB per message15 to 18 MB
Outlook (internet accounts) or iCloud Mail20 MB12 to 15 MB
Business mail (Exchange)Often 10 MB by default, set by your IT teamAsk, or use 7 to 8 MB
FAT32 USB driveJust under 4 GB per file2 GB or 3.9 GB
CDAbout 700 MB700 MB preset
DVD (single layer)About 4.7 GBDVD preset

Leave headroom for email. Attachments are encoded for sending, which adds roughly a third to their size, so a 25 MB limit does not mean a 25 MB part will go through. Our email attachment size limits reference lists the common providers.

How to split a file into parts

These steps use Universal Zip, which splits ZIP and 7Z archives into numbered volumes of any size, with presets for email, CDs, DVDs and USB drives:

  1. Right-click the file or folder you want to split and choose Add to archive.
  2. Choose a format. ZIP is the most compatible; 7Z usually makes the total smaller.
  3. Pick a compression level. For videos, photos or other already-compressed files, a fast level saves time because higher levels gain almost nothing.
  4. Set the split size: pick a preset, or type a custom size such as 15 MB or 2 GB.
  5. Optionally add an AES-256 password, which protects every part.
  6. Create the archive. You will get a set of numbered parts in the destination folder.
  7. Test the archive before deleting the original, so you know the set is complete and readable.

Compression does not change much for video, music, JPEG photos or PDFs, because those are already compressed. Splitting still works perfectly; just expect the total size of the parts to be close to the original.

How the receiver joins the parts back together

This is the part people worry about, but it is simple:

  1. Download or copy every part into one folder. Keep the original file names.
  2. Open or extract the first part, usually the one ending .001. For split ZIP sets named .z01, .z02 and .zip, open the .zip file.
  3. The archive program reads the other parts automatically and writes out the original files.

The receiver needs an archive program that supports split archives. File Explorer does not recognize split volumes. If you are unsure what the other person has, tell them in your message which format you used, or see our guide to opening .001 files, which you can forward to them.

Splitting without compression: the command line option

If you only want to cut a file into pieces and both ends are Windows PCs, there is a no-install route for joining, though not for splitting. Windows has no built-in command to split a file, but it can join parts with the copy command:

copy /b part1 + part2 + part3 original.ext

That only works if the parts were produced by a plain byte splitter in the same order. It does not verify anything: if one part is damaged or out of order, you get a broken file and no warning. An archive's split volumes include checksums, so a damaged part is detected on extraction instead of silently producing a corrupt result.

Common problems and fixes

  • "Missing volume" or "unexpected end" on extraction. A part is missing, was renamed or did not finish copying. Check that every number in the sequence is present and the sizes match.
  • Parts arrive as separate emails in the wrong order. Order does not matter for extraction, only that all parts are in one folder with the right names.
  • Email still bounces. The part size is too close to the limit after encoding, or the recipient's server has a lower limit. Recreate the set with a smaller part size.
  • One part got corrupted in transit. Run an integrity test on the set. If it fails, resend only the damaged part rather than the whole set, as long as you still have the originals from the same archive run. Parts from two different runs do not mix, even with the same settings.
  • Receiver cannot open the parts. They are probably using File Explorer. They need an archive program, or you can send a single self-extracting archive by another route.

Splitting for USB drives

If you are splitting because Windows says a file is too large for a USB drive, check the drive's format first: right-click it in File Explorer and choose Properties. If it says FAT32, you have two choices. Split the file into parts under 4 GB, or reformat the drive as exFAT, which removes the limit but erases the drive. Our guide to copying a file larger than 4 GB to FAT32 compares both approaches. Universal Zip includes a USB preset, so you can split once and copy the parts straight across.

Frequently asked questions

Does Windows have a built-in way to split files?

Not in File Explorer. Windows can create ZIP files, but it cannot split them into volumes, so you need an archive program for this.

How does the receiver put the parts back together?

They put all the parts in one folder and extract from the first part with an archive program. The parts are joined automatically during extraction.

What part size should I choose?

Match it to where the parts are going: below your email provider's attachment limit, under 4 GB for FAT32 USB drives, or the capacity of a CD or DVD.

Get three guides like this every month, plus software update notices.Subscribe →