A .001 file is the first piece of something that was split into numbered parts, such as backup.7z.001, backup.7z.002 and so on. To open it on Windows, put all the parts in the same folder, then open or extract the .001 file with an archive program that supports split volumes. It joins the parts automatically as it extracts. File Explorer cannot open .001 files on its own, but you can join plain split files with the built-in copy /b command and then open the result.
Here is how to tell which kind of .001 you have, how to open each kind, and what to do when a part is missing or will not join.
What kind of .001 file do you have?
The name before .001 tells you most of what you need to know:
| File name pattern | What it is | How to open it |
|---|---|---|
name.7z.001 | A 7Z archive split into volumes | Open .001 in an archive program |
name.zip.001 | A ZIP archive split into volumes by a 7Z-style tool | Open .001 in an archive program |
name.rar.001 | A RAR archive cut into raw pieces | Open .001 in an archive program, or join first |
name.mp4.001, name.iso.001 | Any file cut into raw pieces with a file splitter | Join the parts, then open the joined file |
name.001 only | Unknown: could be either | Try opening in an archive program; if that fails, join and inspect |
Do not confuse these with .z01 (split ZIP in the WinZip style), .r00 or .part1.rar (RAR multi-volume sets). Those are covered in how to extract multi-part RAR files.
Method 1: Extract with an archive program
This is the easiest route for .7z.001 and .zip.001 sets, and it usually works for the others too.
- Download or copy every part into the same folder. The names must match exactly apart from the number.
- Turn on View → Show → File name extensions in File Explorer so you can see the full names.
- Right-click the
.001file and choose Extract to folder or Extract Here. On Windows 11, click Show more options if you do not see them. - Enter the password if the archive is encrypted.
- The program reads
.002,.003and the rest in turn and extracts the contents.
Universal Zip opens split and multi-part archives, including numbered volume sets, and joins the parts automatically during extraction. You can also browse the set before extracting, which is a quick way to confirm all the parts are present.
Method 2: Join the parts with Command Prompt
Windows has a built-in way to join raw split files. It works for files cut into pieces by a splitter, and for split archives, which you can then open as a single file.
- Put all parts in one folder.
- Click the address bar in File Explorer, type
cmdand press Enter. - Run a command that lists the parts in order, for example:
copy /b movie.mp4.001 + movie.mp4.002 + movie.mp4.003 movie.mp4 - When it finishes, open
movie.mp4normally.
With many parts, typing each name is tedious. If the parts are numbered with leading zeros, copy /b movie.mp4.0* movie.mp4 joins them in name order, which matches number order for .001 to .099. Check the size of the result: it should equal the total of all the parts.
The /b switch matters. It tells copy to treat the files as binary. Without it, the joined file can be cut short at the first byte that looks like an end-of-file marker.
In PowerShell, the equivalent is cmd /c copy /b with the same arguments. Native PowerShell commands such as Get-Content are slow for large binary files.
When a part is missing
An archive program will stop with an error such as "missing volume", "cannot open next volume" or "unexpected end of archive" when a part is absent. Before assuming the set is ruined:
- Check the sequence. Sort the folder by name and look for a gap, such as
.004followed by.006. - Check the sizes. All parts except the last are normally exactly the same size. A smaller part in the middle probably did not finish downloading.
- Check the names. Browsers add
(1)to repeated downloads, turningbackup.7z.003intobackup.7z (1).003or similar. Rename it to match. - Check for temporary extensions like
.crdownloador.part, which mean the download is still running or failed.
If a part is truly missing, there is no way to rebuild it. Ask the sender for that part again. Only the missing part is needed, not the whole set. For more on this error, see unexpected end of archive: what it means and how to fix it.
Opening .001 parts that are not archives
If you join the parts and the result will not open, the original may not have been the type you assumed. A few tips:
- Look at the sender's instructions or download page. They usually say what the file is.
- If the joined file has no extension, try opening it in an archive program. Many split sets are archives even when the name does not say so.
- Some splitters create a small extra file, such as a
.sfvor.md5checksum, or a batch file that joins the parts. A checksum file lets you confirm the joined result is correct.
Why people send .001 files
Splitting gets around size limits: email attachment caps, upload limits on file-sharing sites, and the 4 GB per-file limit of FAT32 USB drives. It also makes a failed download cheaper, because only the broken part needs fetching again. If you need to make split files yourself, how to split a large file into smaller parts shows how to choose a sensible part size and preset.
Quick troubleshooting checklist
- All parts in one folder, with identical names apart from the number.
- Open or extract the
.001part, never a later one. - All parts except the last are the same size.
- No temporary download extensions left.
- The password, if any, is typed exactly, including capitals.
- Enough free disk space for the full extracted contents.
Universal Zip can test the whole set for damage, which tells you whether a part is corrupt rather than just missing. If everything checks out and extraction still fails, test the set for damage in your archive program. How to check if an archive is corrupted explains what the results mean.
Frequently asked questions
What is a .001 file?
It is the first part of a file or archive that was split into numbered pieces, such as backup.7z.001, backup.7z.002 and so on.
Can Windows open .001 files?
No. File Explorer does not recognize split parts as an archive. You need an archive program that joins the parts during extraction.
Can I join .001 files with the command line?
Yes. copy /b file.7z.001 + file.7z.002 file.7z joins them in Command Prompt, then you extract the result normally.
