Universal Zip
Windows 10 & 11 Buy license · $24.95
Open and extract

How to Extract Multi-Part RAR Files: part1.rar, part2.rar and .r00

How to extract multi part rar files on Windows: which file to open, the part1 and .r00 naming schemes, and how to fix missing or damaged volumes.

Updated 5 minute read The Universal Zip team

To extract a multi-part RAR file, put every part in the same folder with its original name, then extract only the first part: name.part1.rar, or the plain name.rar in an older .rar, .r00, .r01 set. Your archive program reads the remaining parts in order and rebuilds the original files. You do not need to join the parts first, and you should not extract each part separately.

The rest of this guide explains the naming schemes, which tools handle multi-part sets on Windows, and how to fix the errors that appear when a part is missing or damaged.

Why RAR files come in parts

A multi-part (or "split" or "multi-volume") RAR set is one archive cut into several numbered files. People split archives so that each piece fits a size limit, such as a file host's upload cap, an email attachment limit or a disc. It also means a failed download only costs you one part rather than the whole thing.

The important idea is that the parts are not separate archives. Part 2 on its own is just the middle of a long stream of data. You only get usable files once all the parts are read in sequence.

Recognizing the two naming schemes

SchemeExample filesWhich one to open
Newer (RAR 3 and later, and RAR5)video.part1.rar, video.part2.rar, video.part3.rarvideo.part1.rar
Oldervideo.rar, video.r00, video.r01, video.r02video.rar

With large sets you may see part01.rar or part001.rar instead of part1.rar. The rule is the same: open the lowest number. In the older scheme, note that .rar is the first volume and .r00 is the second, which trips people up.

Do not rename the parts. The archive program finds the next volume by its expected name, so video part 2.rar or video.part2(1).rar will break the chain. If your browser added "(1)" to a re-downloaded part, rename it back to match the others.

How to extract a multi-part RAR set step by step

  1. Download every part. Check the source page for the total number of parts and make sure you have them all, with the sizes listed. Usually all parts except the last are exactly the same size.
  2. Put them in one folder. Move all the parts into a single folder. Do not leave some in Downloads and some on the desktop.
  3. Right-click the first part. With Universal Zip, choose Extract to folder to unpack into a new sub-folder, or Extract Here to unpack beside the archive.
  4. Enter the password if asked. One password covers the whole set.
  5. Wait for all parts to be read. The progress continues through each volume in turn. When it finishes, your files are complete in the destination folder.
  6. Delete the parts only once you have checked the extracted files open properly.

Universal Zip opens multi-part RAR and RAR5 sets, including password-protected ones, and joins the volumes automatically during extraction. You can also double-click part1.rar to browse the full contents before extracting, which is a quick way to confirm the set is what you expected.

Can Windows extract multi-part RAR files by itself?

Windows 10 cannot open RAR files at all without extra software. Windows 11 version 23H2 and later can open many single RAR files in File Explorer, but its built-in support is not designed for multi-volume sets and cannot handle encrypted archives, which many split sets are. If File Explorer shows an error, an empty folder or only part of the content, use an archive program instead. Our guide to opening RAR files on Windows explains what the built-in support can and cannot do.

Fixing common multi-part RAR errors

"You need to start extraction from a previous volume"

You opened a middle part, such as part2.rar or .r00. Close it and extract from part1.rar or the plain .rar file instead.

"Cannot find volume" or "Next volume is missing"

A part is missing, renamed or in another folder. Check the sequence for gaps: if you have parts 1, 2, 3 and 5, part 4 is the problem. Download it again, give it the exact expected name and put it with the others.

"Unexpected end of archive"

Usually the last part, or any part, did not finish downloading. Compare its size with the others: every part but the last should normally be identical in size. Re-download any part that is smaller than its siblings. Our article on the unexpected end of archive error covers this message in detail.

CRC failed or checksum error

One of the parts is corrupted. The error usually names the file being extracted when it hit damage, which tells you roughly which volume is at fault. Re-download that part. An integrity test in your archive program checks the whole set without writing files, so you can confirm the fix before extracting again.

Wrong password

Multi-part sets use one password for the whole archive. If the password is rejected, check Caps Lock and look for a trailing space if you pasted it. If the source lists a password, type it exactly, including any capitals.

Extracting several split sets at once

If you have downloaded several multi-part archives, such as a season of recordings or a set of project files, extracting them one by one gets tedious. Batch extraction lets you select the first part of each set, or point at a whole folder, and each archive is unpacked to its own sub-folder in one run. Universal Zip can also delete the archives once each one has extracted cleanly, which saves a manual cleanup of dozens of part files. See our guide to extracting multiple archives at once for the full workflow.

Disk space and time

A multi-part set needs room for both the parts and the extracted files at the same time, roughly double the total size of the parts. If space is tight, extract to a different drive from the one holding the parts. Extracting from and to the same spinning hard drive is also slower than reading from one drive and writing to another, so for very large sets an SSD or a second drive makes a real difference.

Quick checklist

  • All parts downloaded, none smaller than expected
  • All parts in one folder with original names
  • Extract from part1.rar or the plain .rar
  • Use an archive program that supports RAR5 and multi-volume sets
  • Enough disk space for parts plus extracted files

Frequently asked questions

Which file do I open in a multi-part RAR set?

Open the first volume, usually named part1.rar, or the .rar file in an older .rar, .r00, .r01 set. The extractor reads the other parts automatically.

Do I need to join the parts first?

No. Keep all the parts in the same folder with their original names and extract from the first one. Joining them manually is not needed.

What if one part is missing?

Extraction will stop when it reaches the missing volume. Download or copy that part again, keeping its exact file name, then retry.

Get three guides like this every month, plus software update notices.Subscribe →