You cannot copy a single file larger than 4 GB to a FAT32 drive, because FAT32 stores each file's size in a 32-bit field and the largest file it can hold is 4 GB minus one byte. That is why Windows says "The file is too large for the destination file system" even when the USB stick has plenty of free space. You have three ways around it: split the file into parts smaller than 4 GB, reformat the drive as exFAT or NTFS (which erases it), or convert the drive to NTFS without losing data.
Which one is right depends on what will read the drive afterwards. This guide explains each option, what it costs you and when to use it.
Why the error happens
FAT32 dates from the 1990s, when a 4 GB file seemed enormous. Its limit is per file, not per drive: a 64 GB FAT32 stick can hold sixteen 3.9 GB files, but not one 4.1 GB file. Modern files hit that ceiling all the time:
- Disc images, such as Windows and Linux ISO files
- Long videos recorded in HD or 4K
- Virtual machine disks
- Backup archives and database exports
- Game installers and large downloads
Most USB sticks and SD cards up to 32 GB still ship formatted as FAT32 because almost every device can read it: cars, TVs, cameras, printers, game consoles and older computers.
Step 1: Check how the drive is formatted
- Open File Explorer and click This PC.
- Right-click the USB drive and choose Properties.
- On the General tab, look at File system.
If it says FAT32, the 4 GB limit applies. If it says exFAT or NTFS, the problem is something else, most often a full drive or a write-protected card.
Your three options compared
| Option | Keeps existing data? | Works with TVs, cars and cameras | Best for |
|---|---|---|---|
| Split the file into parts | Yes | Yes, the drive stays FAT32 | Moving a file between PCs, one-off transfers |
| Reformat as exFAT | No, erases the drive | Most modern devices | Moving big files between Windows and Mac |
| Reformat or convert to NTFS | Convert keeps data; format erases | Often read-only or unsupported | Drives used only with Windows PCs |
Option 1: Split the file into parts under 4 GB
Splitting leaves the drive exactly as it is, so it still works in the car stereo or the TV. The trade-off is that the file has to be joined again on the computer at the other end before you can use it, so this is a transfer method, not a way to play a 6 GB movie directly from the stick.
An archive program does the split and the join in one go. In Universal Zip:
- Right-click the large file and choose Add to archive.
- Pick ZIP or 7Z as the format.
- Choose a fast compression level if the file is a video or ISO. These barely compress, so a higher level only adds time.
- Set the split size using the USB preset, or type a custom size such as 2 GB or 3.9 GB.
- Create the archive directly on the USB drive, or create it on your PC and copy the numbered parts across.
- On the other computer, copy all the parts into one folder and extract the first part. The original file is rebuilt automatically.
Our full guide to splitting a large file into smaller parts covers part naming and common problems, and how to open a .001 file explains the receiving end.
Do not pick exactly 4 GB as the part size. FAT32's limit is 4 GB minus one byte, so a part of exactly 4,096 MB fails. Anything up to 3.9 GB is safe.
Option 2: Reformat the drive as exFAT
exFAT was designed for flash drives. It has no practical file size limit, works on Windows and macOS without extra software, and is supported by many newer TVs, cameras and consoles. If the drive is mainly for carrying big files between computers, this is usually the best long-term fix.
Formatting erases everything on the drive, so copy its contents somewhere safe first. Then:
- In File Explorer, right-click the drive and choose Format.
- Set File system to exFAT.
- Leave Allocation unit size on the default.
- Type a volume label if you like and keep Quick Format ticked.
- Click Start, confirm the warning, and wait for it to finish.
- Copy your files back, then copy the large file.
Before you do this, check that the devices you care about read exFAT. Some older car stereos, TVs, printers and media players only understand FAT32. If you are unsure, splitting is the safer choice.
Option 3: Convert or format to NTFS
NTFS is the file system Windows uses for its own drives. It handles huge files and supports permissions and encryption. Windows can convert a FAT32 drive to NTFS in place, without erasing it:
- Back up the drive anyway. Conversion is reliable, but a power cut or a yanked cable mid-way could still damage data.
- Note the drive letter, for example
E:. - Open Command Prompt as administrator.
- Type
convert E: /fs:ntfsand press Enter, using your drive letter. - Wait for the conversion to finish, then copy the large file.
The conversion is one-way. Going back to FAT32 or exFAT means reformatting. Also be aware that Macs read NTFS drives but cannot write to them without extra software, and many TVs, cameras and consoles cannot use NTFS at all. For a drive that only ever plugs into Windows PCs, though, NTFS is fine.
Which option should you choose?
- One-off transfer between two Windows PCs: split the file. No reformatting, no risk to the drive's other contents.
- Drive you use for big files between Windows and Mac: reformat as exFAT.
- External drive that only ever connects to Windows: NTFS, via convert if you want to keep the data.
- Drive that must work in a car, TV or older camera: keep FAT32 and split, or check the device's manual for exFAT support.
- Bootable installer USB: many PCs need FAT32 to boot in UEFI mode. Tools that make boot drives handle oversized files themselves, so do not reformat a boot drive by hand.
Could compression alone make it fit?
Sometimes. If the file is just over 4 GB and made of material that compresses well, such as a database export, log files or an uncompressed disk image, a 7Z archive at a high compression level may come out under the limit as a single file. Videos, photos, music and most ISOs are already compressed, so they will not shrink enough. When in doubt, set a split size anyway: if the archive ends up under 4 GB, you simply get one part. Universal Zip includes a USB preset for exactly this case.
Large backups on FAT32 drives
If you are copying backups to a FAT32 drive, splitting is built into a good routine: compress, encrypt, split into parts under 4 GB and test the set before you rely on it. Our guide to compressing files for backup walks through that workflow. For a drive that holds nothing but your own backups and only connects to Windows, though, converting it to NTFS once saves you from splitting every time.
Frequently asked questions
Why can't I copy a 5GB file to my USB drive?
The drive is formatted FAT32, which cannot store any single file of 4 GB or more, no matter how much free space it has.
Will reformatting to exFAT delete my files?
Yes. Formatting erases the drive, so copy everything off first. exFAT removes the 4 GB limit and works on Windows and macOS.
Why not just use NTFS?
NTFS works well on Windows, but some TVs, cameras, game consoles and Macs can read it only partly or not at all.
