Universal Zip
Windows 10 & 11 Buy license · $24.95
Open and extract

How to Change the Default Program That Opens ZIP Files on Windows

Change the default program to open zip files on Windows 10 and 11, set RAR and 7Z associations, and switch back to File Explorer's built-in zip support.

Updated 5 minute read The Universal Zip team

To change the default program that opens ZIP files on Windows, right-click any ZIP, choose Open with → Choose another app, pick the program you want and select Always (Windows 11) or tick Always use this app to open .zip files (Windows 10). You can also do it in Settings → Apps → Default apps. Windows stores the choice per extension, so .rar, .7z and other archive types each need setting separately.

Below you will find both methods step by step, how to switch ZIPs back to File Explorer, and what to do when Windows keeps resetting your choice.

Method 1: Open with (the quickest way)

Windows 11

  1. Right-click a ZIP file in File Explorer.
  2. Choose Open with → Choose another app.
  3. Select the program you want. If it is not listed, scroll down and click Choose an app on your PC, then browse to the program's EXE in C:\Program Files.
  4. Click Always. Clicking Just once opens this file only and leaves the default unchanged.

Windows 10

  1. Right-click a ZIP file and choose Open with → Choose another app.
  2. Select the program from the list, or click More apps to see others.
  3. Tick Always use this app to open .zip files.
  4. Click OK.

Repeat on a RAR file, a 7Z file and any other archive type you use.

Method 2: Settings, Default apps

This route is handy when you want to set several file types in one sitting.

Windows 11

  1. Open Settings → Apps → Default apps.
  2. In the box labeled Set a default for a file type or link type, type .zip.
  3. Click the program shown under the result and choose the new one.
  4. Repeat for .rar, .7z, .tar, .gz, .iso and so on.

Alternatively, scroll the app list on the same page, click your archive program and set each extension it offers in one place.

Windows 10

  1. Open Settings → Apps → Default apps.
  2. Click Choose default apps by file type.
  3. Scroll to .zip, click the current program and pick the new one.
  4. Repeat for the other archive extensions.

Which extensions to set

If you want one program to handle everything, these are the extensions worth checking:

ExtensionWhat it isBuilt-in Windows support
.zipStandard archiveYes, all versions
.rarRAR archive, common for downloadsWindows 11 23H2 and later, unencrypted only
.7z7-Zip format, small archivesWindows 11 23H2 and later, unencrypted only
.tar, .gz, .tgz, .bz2, .xzLinux and server archivesPartial, varies by version
.isoDisc imageYes, opens by mounting as a drive
.cabMicrosoft Cabinet fileYes, browse in File Explorer
.001First part of a split archiveNo

Think twice before changing .iso. Windows' default of mounting the image as a virtual drive is often what you want for installers. An archive program is better when you just need to copy a few files out. See how to open an ISO file on Windows.

How to make ZIP files open in File Explorer again

If an archive program took over ZIP files and you would rather have Windows' built-in handling back:

  1. Right-click a ZIP and choose Open with → Choose another app.
  2. Select File Explorer (shown as Windows Explorer on some versions). If it is not in the list, click More apps or Choose an app on your PC and browse to C:\Windows\explorer.exe.
  3. Choose Always, or tick the always box on Windows 10.

This also brings back Extract All on the right-click menu if it vanished. If browsing to explorer.exe does not give you the folder-style view, use the Settings method and pick the entry for Windows' compressed folders instead.

Why ZIPs open in the wrong program

  • A newer program claimed the type. Archive tools, download managers and some backup programs register for .zip during installation. Many ask, but some do not.
  • An uninstall left a broken link. If the program that owned ZIPs was removed, double-clicking may ask you to pick an app or show an error. Set a new default using either method above.
  • A Windows update reset defaults. Occasionally an update resets some associations and shows a notification that an app default was reset. Set it again; it normally sticks afterwards.
  • Work PC policies. On managed computers, IT may set defaults with a policy that overrides your choice at each sign-in. Ask them to change it.

When Windows will not keep your choice

If the default keeps reverting:

  1. Make sure you are choosing Always, not Just once.
  2. Update or reinstall the archive program so it registers itself properly with Windows.
  3. Check the program's own settings for a file association section and tick the extensions there. Many archive programs manage associations from inside the app.
  4. Sign out and back in after changing defaults, so that File Explorer picks them up.
  5. On a work PC, check with IT for a group policy.

Checking which program is the default right now

Before changing anything, it helps to see what Windows currently uses. Right-click a ZIP, choose Properties and look at Opens with on the General tab. The Change button next to it is a third way to set the default, and it works the same way as Open with.

You can also check from the command line. In Command Prompt, assoc .zip shows the file type name Windows has linked to the extension. That is mostly useful for troubleshooting, because modern Windows versions store the user's choice separately and protect it, so changing defaults from the command line or by editing the registry directly is unreliable. Stick with Open with or Settings.

Default program vs right-click options

It is worth separating two things that are easy to confuse. The default program decides what happens when you double-click an archive. The right-click menu entries, such as Extract Here, are added by each installed archive program regardless of which one is the default. So you can keep File Explorer as the double-click handler for ZIPs and still use an archive program's right-click options to extract RAR or 7Z files, or the other way round.

One program for every archive

Setting one program for all archive types means every download opens the same way, with the same right-click options. Universal Zip opens more than 30 formats, including ZIP, RAR, RAR5, 7Z, ISO, TAR, GZ, CAB and multi-part sets, so once it is your default you can double-click any of them. It also adds Extract Here and Extract to folder to the right-click menu, which works whichever program is the default. If you prefer to keep File Explorer for ZIPs, you can set Universal Zip for .rar and .7z only.

If the menu entries are missing after you change defaults, see Extract Here option missing from the right-click menu. And if you mostly need to unpack files rather than open them, how to unzip files on Windows 10 covers the basics for every common format.

Frequently asked questions

How do I make zip files open in File Explorer again?

Right-click a ZIP, choose Open with, then Choose another app, pick Windows Explorer and tick Always use this app.

Why do my zip files open in the wrong program?

A program installed later registered itself for .zip files. Change the default in Settings, Apps, Default apps.

Do I need to set each archive type separately?

Yes. Windows stores defaults per extension, so .zip, .rar and .7z can each open in a different program.

Get three guides like this every month, plus software update notices.Subscribe →